| SOP: Preparation for SC-3340 & SC-3345 XRF Sample Cups |
| |
 |
1. To prepare your sample cup for analysis, you will require an Inner Ring (1), an Outer Ring (2), and a Cap. |
| |
| 2. Place Ring (1) with the larger end downward onto the table. Then, place the film on top. |
 |
| |
 |
3. Place the Outer Ring (2) on top of the Inner (1) Ring... |
| |
| ...And now use the PREMIER Tool to push the Ring all the way down. The hole in the middle of the Tool allows air to escape, preventing sagging of the film. |
 |
| |
 |
4. be certain that there are no folds or creases in the Film. It should look perfect. Now fill your cup with a liquid or solid sample. The Inner Ring contains a "Fill Line" (SC-3345: 5.5ml or 11ml; SC-3340: 9.3ml). |
| |
| 5. Finally, close your sample cup with the snap on cap. There is a "Labeling Area" for you to write your sample description right on the cap. |
 |
